59
Others
(ENG) SQT0775
Troubleshooting
First, try out the following procedures.
•
Please also refer to the “Owner’s Manual for advanced features (PDF format)”, which describes
more detailed information.
• The battery is exhausted.
> Charge the battery.
• If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [Economy] etc.
• Is the drive mode set to [ ] ([4K Pre-Burst])? When [ ] ([4K Pre-Burst]) is selected, the
battery drains faster.
> Select [ ] ([4K Pre-Burst]) only when recording.
• When the drive mode is set to [ ] ([4K Pre-Burst]), the camera temperature rises. In some
cases, the camera may display [ ], switch to [ ] ([4K Burst]) and stop the recording to
protect itself. Wait until the camera cools down.
• The subject is beyond the focus range of the camera. (P20)
• There is camera shake (jitter) or the subject is moving slightly.
• Is [Focus/Release Priority] in the [Custom] menu set to [RELEASE]?
• Is [Shutter AF] in the [Custom] menu set to [OFF]?
• Is the AF Lock applied incorrectly?
If the problem is not resolved, it may be improved by selecting [Reset] on the
[Setup] menu.
The camera cannot be operated even when it is turned on.
The camera turns off immediately after it is turned on.
The battery becomes flat too quickly.
Taking pictures is not possible.
The shutter will not operate immediately when the shutter button is pressed.
The subject is not focused properly.
DMC-GX8_PP-SQT0775_eng.book 59 ページ ２０１５年７月７日 火曜日 午後５時１分
To Next Page
Loading...
Need help?
General
