47
2. Getting Started/Basic Operations
Displaying a picture right after it is taken
•
When [Duration Time] is set to [HOLD], [Playback Operation Priority] is fixed to [ON].
• When recording with the 4K Photo function, settings available for [Duration Time] in [Auto
Review] change to [ON] and [OFF]. [Playback Operation Priority] is fixed to [ON].
Press the motion picture button to start and stop recording a motion picture.
Start recording by pressing the motion picture
button.
• Release the motion picture button right after you press it.
Stop the recording by pressing the motion picture
button again.
> [Custom] > [Auto Review]
[Duration Time]
Set the length of time that the picture is displayed after taking the
still picture.
[HOLD]:
The pictures are displayed until shutter button is pressed halfway.
[5SEC]/[4SEC]/[3SEC]/[2SEC]/[1SEC]/[OFF]
[Playback Operation
Priority]
[ON] Switching the display of the playback screen, deleting
pictures, etc. are possible during [Auto Review].
[OFF] Button operations during [Auto Review] become the
same as those for recording.
Motion picture button (Recording motion pictures)
MENU
To Next Page
Loading...
Need help?
General
