(ENG) VQT3X04 7
Contents
Before use
Information for Your Safety .......2
Before use ...................................7
Standard accessories ................8
Names and Functions of
Main Parts .................................10
Charging the battery ................12
Inserting and removing the
card (optional)/the battery .......13
Sequence of operations ...........14
Reading the Operating
Instructions (PDF format) ........15
Installing supplied software
(PHOTOfunSTUDIO) .................16
Specifications ...........................17
■
Camera handling
●
Keep the camera away from excessive vibration, force, or pressure.
●
The camera is not dust resistant, splash resistant, or waterproof.
Avoid using the camera in places with excessive dust or sand, or
where water can come into contact with the camera.
■
Condensation (When the lens or the LCD monitor is fogged up)
●
Condensation may occur when the camera is exposed to sudden changes
of temperature or humidity. Avoid these conditions, which may make the
lens or LCD monitor dirty, cause mould, or damage the camera.
●
If condensation does occur, turn off the camera and wait about two
hours before using it. Once the camera adjusts to the surrounding
temperature, fogginess will clear naturally.
●
Please note that the actual controls and components, menu items, and other
information for your digital camera may differ from those in the illustrations and
screens provided in this manual. When operation or other information is more or
less the same between models, DMC-FS40/DMC-FS41 are used as examples for
the instructions provided in this manual.
●
The operations, procedures, or functions that differ among models are indicated
separately, together with the relevant model number.
(Example)
DMC-FS40
DMC-S2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
