- 101 -
Connecting to other equipment
∫ Installing supplied software
•
Before inserting the CD-ROM, close all running applications.
1
Check the environment of your PC.
• Operating environment of “PHOTOfunSTUDIO 9.0 LE”
– OS:
Windows
R
XP (32bit) SP3,
Windows Vista
R
(32bit) SP2,
Windows
R
7 (32bit/64bit) or SP1
Windows
R
8 (32bit/64bit)
–
CPU:
Pentium
R
III 500 MHz or higher (Windows
R
XP),
Pentium
R
III 800 MHz or higher (Windows Vista
R
),
Pentium
R
III 1 GHz or higher (Windows
R
7/Windows
R
8)
–
Display:
1024k768 pixels or more (1920k1080 pixels or more recommended)
–
RAM:
512 MB or more (Windows
R
XP/Windows Vista
R
),
1 GB or more (Windows
R
7 32bit/Windows
R
8 32bit),
2 GB or more (Windows
R
7 64bit/Windows
R
8 64bit)
–
Free hard disk space:
450 MB or more for installing software
•
Refer to the operating instructions of “PHOTOfunSTUDIO” (PDF) for further operating
environment.
2
Insert the CD-ROM with the supplied software.
• When you insert the supplied CD-ROM, the install menu will start.
3
Click on the [Applications] on the install menu.
4
Click on the [Recommended Installation].
• Proceed with installation according to messages appearing on the screen.
• The software compatible with your PC will be installed.
• “PHOTOfunSTUDIO” is not compatible with Mac.
To Next Page
Loading...
