- 121 -
Others
• This phenomenon appears when you press the shutter button halfway to set the aperture value and
does not affect the recorded pictures.
• This phenomenon also appears when the brightness changes when the camera is zoomed or when
the camera is moved. This is because of operation of the automatic aperture of the camera, and it is
not a malfunction.
• The LCD monitor may flicker for a few seconds after turning this unit on. This is an operation to
correct flicker caused by lighting such as fluorescent lights, LED lights etc. and is not a malfunction.
• Perform [Monitor Display]. (P40)
• This is not a malfunction. These pixels do not affect the recorded pictures.
• In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not affect
the pictures you are recording.
LCD monitor
The LCD monitor becomes darker or brighter for a moment.
The LCD monitor flickers indoors.
The LCD monitor is too bright or dark.
Black, red, blue and green dots appear on the LCD monitor.
Noise appears on the LCD monitor.
To Next Page
Loading...
