- 125 -
Others
> Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not format.
> If the [Access] displayed on the LCD monitor does not disappear, disconnect the USB
connection cable after turning this unit off.
• Pictures cannot be printed using a printer that does not support PictBridge.
> Select [PictBridge(PTP)] when connecting. (P104)
> When using a printer with a Cropping or borderless printing function, cancel this function before
printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be
printed.
• Since aspect ratio of a panorama picture differs from normal pictures, it may not always be possible
to print it correctly.
> Please use a printer that supports panorama pictures. (For details, refer to the operating
instructions for the printer.)
> We recommend using the “PHOTOfunSTUDIO” software on the CD-ROM (supplied) to adjust
the size of the still picture to the print paper size.
The card is not recognised by the PC. (SDXC memory card is used)
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
The panorama picture is not printing correctly.
To Next Page
Loading...
