- 102 -
Wi-Fi
1 Connect to a smartphone/tablet. (P97)
2 Operate the smartphone/tablet.
You can acquire location information from a smartphone/tablet, and write it on images
afterwards.
Refer to P87 for how to write the location information on the images recorded by this unit.
•
Read the [Help] in the “Image App” menu for further details on how to operate.
• Cautions for Use:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when
you use this function. Use at your own risk.
• If you have changed the clock setting of this unit or the smartphone/tablet after [Time sync], perform
[Time sync] again.
• On the smartphone/tablet, you can set the acquisition interval of location information and check the
transfer status of location information.
Refer to [Help] in the “Image App” menu for details.
• (When using “Image App” for iOS)
If you press the Home or On/Off button of a smartphone/tablet while [Rec. loc. Info] is working,
location information recording is stopped.
• The smartphone/tablet may fail to acquire location information in China and the border area in the
neighbouring countries of China.
(As of January 2014)
Saving images stored in the camera
1 Select [ ].
2 Press and hold an image, and drag it to save it on the
smartphone/tablet.
•
Motion pictures cannot be saved.
Sending location information to the camera from a smartphone/tablet
To Next Page
Loading...
