- 124 -
Wi-Fi
• For details on how to enter characters, refer to “Entering Text” section on P117.
• Make a copy of password.
If you forget the password, you can reset it with [Reset Wi-Fi Settings] in the [Setup] menu, however
other settings will also be reset.
• A “MAC Address” is a unique address that is used to identify network equipment.
• “IP Address” refers to a number that identifies a PC connected to a network such as the Internet.
Usually, the addresses for homes are automatically assigned by the DHCP function such as a
wireless access point. (Example: 192.168.0.87)
¢1 [Approved Regulations] is only available on the version DMC-SZ8P.
¢2 [Regulations] is only available on the version DMC-SZ8PC.
[Wi-Fi Password]
To prevent incorrect operation or use of the Wi-Fi function by a third
party and to protect saved personal information, it is recommended
that you protect the Wi-Fi function with a password.
Setting a password will automatically display the password input
screen when the Wi-Fi function is used.
[Setup]:
Enter any 4-digit numbers as the password.
Exit the menu after it is set.
[Delete]
[Network Address] Displays the MAC address and IP address of this unit.
[Approved
Regulations]
¢1
The technical compliance standard authentication number is
displayed.
[Regulations]
¢2
Displays the regulations.
To Next Page
Loading...
