- 163 -
Connecting to other equipment
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
Set the mode dial to anything except [¨].
A USB connection cable (supplied)
• Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which may cause malfunction.)
B Align the marks, and insert.
• Use a battery with sufficient battery power or the AC adaptor (optional). When using the AC
adaptor (optional), use the multi conversion adaptor (optional). If the remaining battery power
becomes low while the camera and the PC are communicating, the alarm beeps.
Refer to
“Disconnecting the USB connection cable safely” (P164) before disconnecting the
USB connection cable. Otherwise, data may be destroyed.
Acquiring of still pictures and [MOTION JPEG] motion pictures
(other than [AVCHD Lite] motion pictures)
DIGITAL
AV/
/MULTI
To Next Page
Loading...
Need help?
General
