15
(ENG) VQT2M30
• When the camera is used in the following conditions, a gap may occur between
the camera and the card/battery door or terminal cover, causing water to leak
and malfunction.
–When there are foreign objects, such as lint, hair, sand, etc., between the card/
battery door or terminal cover and the camera.
–When the rubber seal has deteriorated.
–When the [LOCK] switch is not closed on the card/battery door and terminal
cover.
Causes of water leak
A: Water will leak through
the gap formed remove.
B: Water
C: Terminal cover
D: Card/Battery door
E: Hair and lint
F: Sand and dust
G: Crack and deformation
H:Fluid
DMC-FT2&TS2P-VQT2M30_eng.book 15 ページ ２０１０年１月２９日 金曜日 午後５時３１分
To Next Page
Loading...
