Preparation
- 26 -
∫ Connecting the AC adaptor and multi conversion adaptor instead of the battery
The AC Adaptor (optional) can only be used with the designated Panasonic multi
conversion adaptor (optional). The AC adaptor (optional) cannot be used by itself. Also,
read the instruction for the multi conversion adaptor (optional) regarding the connection.
1 Slide the [LOCK] switch, and release the lock.
2 Slide the release lever.
3 Open the terminal cover.
4 Connect the camera with the multi conversion adaptor (optional).
•
Ensure that only the AC adaptor (optional) and multi conversion adaptor (optional) for this
camera are used. Using any other equipment may cause damage.
5 Connect the AC cable to the AC adaptor and a wall electrical outlet.
6 Connect the AC adaptor to the multi conversion adaptor.
Note
•
Always use a genuine Panasonic AC adaptor (optional).
• Always use a genuine Panasonic multi conversion adaptor (optional).
• If there is loss of power supply while recording motion pictures using the AC adapter
(e.g. the AC adaptor is disconnected), the motion picture recorded will not be stored. We
recommend the use of both a fully charged battery and the AC adaptor at the same time.
To Next Page
Loading...
Need help?
General
