Recording
- 89 -
Clock of the camera is automatically corrected to the time of the current location utilising
the date and time information received from the GPS satellites. The clock is automatically
set to local time when you travel to countries or regions with a time difference and the
positioning is successful.
Select [Auto Clock Set] (P46) from the [Setup] menu. (P44)
Press / to select [ON], and then press [MENU/SET].
Perform procedures from step
6 of “Setting Date/Time (Clock Set)”
(P27) (first time only).
Note
• When [Auto Clock Set] is set to [ON], [World Time] (P96) is set to [Destination] automatically.
• The date and time corrected with [Auto Clock Set] are not as accurate as the radio clock. If it
cannot correct accurately, reset the clock using [Clock Set].
Automatically correct the clock using GPS function
To Next Page
Loading...
Need help?
General
