- 172 -
Others
[Memory card error.
This card cannot be used in this camera.
Format this card?]
•
It is a format that cannot be used with this unit.
Insert a different card.
Format the card again with the camera after saving necessary data on a PC etc. (P53)
Data will be deleted.
[Please turn camera off and then on again]/[System Error]
•
This message will be displayed when the lens did not operate properly.
Turn the camera off and on. If the message persists, contact the dealer or your nearest
Service Center.
[Memory card parameter error]/[This memory card cannot be used]
Use a card compatible with this unit. (P24)
– SD Memory Card (8 MB to 2 GB)
– SDHC Memory Card (4 GB to 32 GB)
– SDXC Memory Card (48 GB, 64 GB)
[Insert SD card again]/[Try another card]
•
An error has occurred accessing the card.
Insert the card again.
Insert a different card.
[Read Error/Write Error
Please check the card]
•
It has failed to read or write data.
Remove the card after turning the power off. Insert the card again, turn the power on, and
try to read or write the data again.
• The card may be broken.
Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the
card]
•
Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures in
[AVCHD].
Also, use a card with SD Speed Class with “Class 6” or higher when recording motion pictures
in [Motion JPEG].
• In the event that it stops even after using a “Class 4” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format (P53).
• Depending on the type of the card, Motion Picture Recording may stop in the middle.
To Next Page
Loading...
Need help?
General
