- 116 -
Playback/Editing
∫ Canceling all the [Print Set] settings
1 Select [Print Set] on the [Playback] menu.
2 Press 3/4 to select [CANCEL] and then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
∫ To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing
[DISP.].
•
Depending on the photo printing store or the printer, the date may not be printed even if you set to
print the date. For further information, ask at your photo printing store or refer to the operating
instructions for the printer.
• The date cannot be printed on pictures with date or text stamped.
• The number of prints can be set from 0 to 999.
• Depending on the printer, the date print settings of the printer may take precedence so check if this
is the case.
• It may not be possible to use the print settings with other equipment. In this case, cancel all the
settings, and reset the settings.
• You cannot use [Print Set] for the following pictures.
– Motion pictures
– File that does not comply with the DCF standard
To Next Page
Loading...
Need help?
General
