- 119 -
Playback/Editing
You can copy the data of the pictures you have taken from the built-in memory to a card or from
a card to the built-in memory.
Select [Copy] on the [Playback] menu.
Press 3/4 to select the copy destination and then press
[MENU/SET].
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
• Do not turn the camera off at any point during the copying process.
• If a picture exists with the same name (folder number/file number) as the picture to be copied in the
copy destination when [ ] is selected, a new folder is created and the picture is copied. If a
picture exists with the same name (folder number/file number) as the picture to be copied in the copy
destination when [ ] is selected, that picture is not copied.
• It may take time to copy the picture data.
• [Print Set], [Protect] or [Favorite] settings will not be copied. Perform the settings again after copying
is finished.
[Copy]
[]([IN>SD]): All the picture data in the built-in memory are copied onto the card at
one time.
[]([SD>IN]): One picture at a time is copied from the card to the built-in memory.
Press 2/1 to select the picture and then press [MENU/SET].
To Next Page
Loading...
Need help?
General
