- 124 -
Connecting to other equipment
∫ Transferring pictures to a PC
Connect the computer and camera with the USB connection cable
(supplied).
Press 3/4 to select [PC], and then press [MENU/SET].
Copy the images to a PC using “PHOTOfunSTUDIO”.
• Do not delete or move copied files or folders in Windows Explorer. When viewing in
“PHOTOfunSTUDIO”, you will not be able to play back or edit.
• Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery
power becomes low while the camera and the PC are communicating, the status indicator blinks and
the alarm beeps.
Refer to
“Disconnecting the USB connection cable safely” (P125) before disconnecting the USB
connection cable. Otherwise, data may be destroyed.
• Before connecting or disconnecting the AC adaptor (optional), turn the camera off.
• Before inserting or removing a card, turn the camera off and disconnect the USB connection cable.
Otherwise, data may be destroyed.
Preparations: Install “PHOTOfunSTUDIO” to the PC.
•
Please turn this unit on and your PC before connecting.
• Check the directions of the connectors, and plug them straight in or unplug them straight
out. (Otherwise the connectors may be bend of shape, which will cause a malfunction.)
• Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (DMW-USBC1: optional).
A USB connection cable (supplied) B Align the marks, and insert.
To Next Page
Loading...
Need help?
General
