- 44 -
Basic
• When you connect the camera to a TV, the volume of the TV speakers does not change. Also, when
connected, no sound is output from the camera speakers.
• Some subjects may appear differently from actuality on the LCD monitor. However, this does not
affect the recorded pictures.
• When [Monitor Luminance] is set to [High Angle], [Brightness] and [Contrast · Saturation] cannot be
adjusted.
r [Beep]
This allows you to set the beep and shutter sound.
r [Beep Level]: [Shutter Vol.]:
[t]
[u]
[s]
([Low])
([High])
([OFF])
[]
[]
[]
([Low])
([High])
([OFF])
[Beep Tone]:
[]/[]/[]
[Shutter Tone]:
[]/[]/[]
u [Speaker Volume]
Adjust the volume of the speaker to any of the 7 levels.
[Monitor Display]
Brightness, color, or red or blue tint of the LCD monitor is adjusted.
[Brightness]:
Adjust the brightness.
[Contrast · Saturation]:
Adjust the contrast or clarity of colors.
[Red Tint]:
Adjust the red tint.
[Blue Tint]:
Adjust the blue tint.
1 Select the settings by pressing 3/4, and adjust with 2/1.
2 Press [MENU/SET] to set.
3
2
To Next Page
Loading...
