- 47 -
Basic
• Maximum illuminating range of the LED light is 50 cm (1.6 feet).
• The life of battery will decrease when the LED light is turned on constantly.
• In locations where the use of light is prohibited, set to [ ].
• It is fixed to [ ] in the following cases.
– [Advanced Underwater]
– [Panorama Shot]
– [Baby1]/[Baby2] (Scene Mode)
• It is not available in Playback Mode.
• [Auto Power Off] is set to [5MIN. ] in the Intelligent Auto Mode.
• [Auto Power Off] does not work in the following cases.
– When using the AC adaptor
– When connecting to a PC or a printer
– When using [Time Lapse Shot]
– When recording or playing back motion pictures
– During a Slide Show
[LED Light]
This will illuminate the subject with a lamp when taking motion pictures
in dark surrounding.
Also, the LED can also be used as a simple light when necessary.
[] ([On]):
LED light A is turned on continuously while
recording motion pictures.
[] ([Off]):
To use a simple light
If you set to [ ], and press and hold down 1 (‰) on the recording
standby screen, the LED light will come on for 60 seconds. The LED
light can be conveniently used as a simple light when you wish to
illuminate your immediate surroundings in a dark location.
To turn off the light at any time, press [ ].
p [Auto Power Off]
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[2MIN.]/[5MIN.]/[10MIN.]/[OFF]
To Next Page
Loading...
Need help?
General
