- 88 -
Recording
You can modify the pictures or information of an already registered person. You can also delete
the information of the registered person.
1 Press 4 to select [MEMORY] and press [MENU/SET].
2 Press 3/4/2/1 to select the face image to edit or delete and then press [MENU/
SET].
3 Press 3/4 to select the item and then press [MENU/SET].
•
Exit the menu after it is set.
∫ Point of recording when registering the face images
•
Face front with eyes open and mouth closed, making sure the
outline of the face, the eyes, or the eyebrows are not covered with
the hair when registering.
• Make sure there is no extreme shading on the face when
registering. (Flash will not flash during registration.)
(Good example for
registering)
∫ When it is not recognizing during recording
•
Register the face of same person indoors and outdoors, or with different expressions or angles. (P87)
• Additionally register at the location of recording.
• When a person who is registered is not recognized, correct by re-registering.
• Face Recognition may not be possible or may not recognize faces correctly even for registered
faces, depending on the facial expression and environment.
Change or delete the information for a registered person
Item Description of settings
[Info Edit]
Changing the information of an already registered person.
Perform step
5 in “Face Settings”.
[Priority]
The focus and exposure are preferentially adjusted for
higher-priority faces.
Press 3/4/2/1 to select the priority and then press [MENU/
SET].
[Delete]
Deleting information of a registered person.
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
To Next Page
Loading...
Need help?
General
