Panasonic Lumix DMC-TZ3EB - Disassembly Procedure

23
8.3. Disassembly Procedure
8.3.1. Removal of the Rear Case Unit
For DMC-TZ3
Fig. D1
No. Item Fig Removal
1 Rear Case Unit Fig. D1
(DMC-
TZ3)
Fig. D1a
(DMC-
TZ2)
Card
Battery
3 Screws (A)
1 Screw (B)
1 Screw (C)
FP9001(Flex) (DMC-TZ3)
FP9003(Flex) (DMC-TZ3)
FP9002(Flex) (DMC-TZ2)
FP9004(Flex) (DMC-TZ2)
Strap Holder
Heat Radiation Sheet
(DMC-TZ3)
Lens Barrier Sheet
(DMC-TZ2)
Rear Case Unit
2 LCD Unit Fig. D2
(DMC-
TZ3)
Fig. D2a
(DMC-
TZ2)
5 Locking tabs
LCD Unit
3 Main P.C.B. Fig. D3
(DMC-
TZ3)
Fig. D3a
(DMC-
TZ2)
PP9001(Connector)
FP9005(Flex)
Main P.C.B.
4 Lens Unit Fig. D4 1 Screw (D)
2 Screws (E)
FP9801(Flex)
FP9802(Flex)
Lens Unit
5 Top Operation Unit Fig. D5 Top Operation Unit
6 Top Operation P.C.B.
AF Assist P.C.B.
Speaker
Fig. D6 2 Locking tabs
2 Screws (F)
Top Operation P.C.B.
AF Assist P.C.B.
Speaker
Fig. D7 NOTE: (When Installing)
7 Sub P.C.B. Fig. D8 1 Screw (G)
1 Screw (H)
Earth Plate
FP9803(Flex)
1 Locking tab
Sub P.C.B.
8 Flash Unit
Battery Frame Unit
Lens Plate
Front Grip
Fig. D9 2 Screws (I)
1 Screw (J)
2 Screws (K)
2 Screws (L)
Fig. D10 2 Locking tabs
Flash Unit
Battery Frame Unit
Lens Plate
Front Grip
9 Battery Case Fig. D11 3 Locking tabs
Battery Case