Preparation
Inserting and Removing the Card (optional)/the
Battery
• Check that this unit is turned off.
• We recommend using a Panasonic card.
D Slide the release lever in the
direction
of
'''''~
the
arrow
and open the card/battery door.
• Always use genuine Panasonic batteries
(DMW-BCG10PP).
•
If
you
use
other
batteries, we cannot guarantee
the
quality
of
this
product.
f)
Battery:
Insert
until
it
is
locked
by
the
"
.....
"
lever
® being careful
about
the
direction
you
insert
it. Pull the lever ® in
the
direction
of
the arrow
to
remove the
battery.
Card: Push
it
fully
until
it
clicks
being
careful
about
the
direction
you
insert
it.
To
remove the card, push the card
until
it
clicks,
then
pull
the card
out
upright.
@: Do not touch the connection terminals
of
the
card.
• The card may be damaged if it is not fully inserted.
m
O:Close
the
card/battery door.
8:Slide
the release lever in the
direction
of
the arrow.
• If the card/battery door cannot
be
completely
closed, remove the card, check its direction and
then insert it again.
o
(ENG) VQT2G33 13
To Next Page
Loading...
