Preparation
(
:
~
.
_Setting DateITime (Clock Set)
)
• The
clock
is
not
set
when
the
camera
is
shipped.
oTurn
the
camera on.
• The [PLEASE SET THE CLOCK] message appears.
(This message does not appear
in
[PLAYBACK)
Mode.)
® [MENU/SET] button
® Cursor buttons
f)
Press [MENU/SET].
II
Press [MENU/SET]
to
set.
• After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to Recording Mode, and check that the display reflects the settings that were
performed.
• When [MENU/SET) has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the "Changing the clock setting" procedure
below.
11
Press
.....
/~
t~
select
the
items
(year,
mo~th,
. day, hour,
minute,
display
sequence
or
time
display
format), and press
£IY
to
set.
iliJ:
Cancel without setting the clock.
Changing
the
clock
setting
Select
[CLOCK
SET]
in
the
[REC]
or
[SETUP]
menu,
and
press
~.
•
It
can
be
changed
in
steps 3 and 4 to set the clock.
• The
clock
setting
is
maintained
for
3
months
using
the
built-in
clock
battery
even
without
the battery. (Leave
the
charged battery in
the
unit
for
24
hours
to
charge the
built-in battery.)
14 VQT2G33 (ENG)
To Next Page
Loading...
Need help?
General
