VQT4P14
Basics
Using the [Setup] menu
- 47 -
• For the setting procedures of the menu. (→42)
[Monitor Luminance]
Make LCD monitor easier to see.
■
Settings
[Auto Power Monitor]:
The brightness is adjusted automatically depending on how bright it is around the
camera.
[Power Monitor]:
Makes screen brighter than normal (for outdoor use).
[High Angle]:
Makes the LCD monitor screen easier to see when the camera is held above eye
level.
[OFF]
●
Cannot select [Auto Power Monitor] and [High Angle] in playback mode.
●
[Power Monitor] returns to ordinary brightness if there is no operation for 30 seconds
when recording. (Press any button to make the screen brighter again.)
●
[High Angle] will be canceled if the camera is turned off.
●
Because the picture shown on the LCD monitor screen emphasizes brightness, some
subjects may look different than their actual appearance, but this will not affect the
recorded picture.
●
Setting [Monitor Luminance] reduces the operating time.
[Guide Line]
Select recording information display and types of guidelines.
■
Settings
[Rec. Info.]
[ON] (Display recording information with guidelines.)
[OFF]
[Pattern]
/ : Change the patterns of guidelines.
●
When [Intelligent Auto] Mode has been selected, only is displayed. Also, recording
information and guidelines cannot be displayed simultaneously.
●
Cannot be used in the following case:
• [Panorama Shot] Mode
To Next Page
Loading...
Need help?
General
Weight and Dimensions
