Wi-Fi/NFC
About connections
SQW0195
- 253 -
[Direct] Connecting directly
You can select the connection method to your equipment.
Select a connection method with which your equipment is
compatible.
• To connect this unit with [Wi-Fi Direct], Android OS 4.0 or
above is required and the device must be compatible with
Wi-Fi Direct™.
• WPS refers to a function that allows you to easily configure
the settings related to the connection and security of
wireless LAN devices.
Connection method Description
[Wi-Fi Direct]
Set the device to Wi-Fi Direct™ mode
Select [Wi-Fi Direct]
Select the device to connect to
• Read the operating instructions of your device for details.
[WPS Connection]
[WPS (Push-Button)]
Select [WPS (Push-Button)]
Set the device to WPS mode
• You can wait longer for a connection by pressing the [DISP.] button
on this unit.
[WPS (PIN code)]
Select [WPS (PIN code)]
Enter the PIN code of the device into this unit
[Manual Connection]
Enter the SSID and password into the device. The SSID and
password are displayed on the connection waiting screen of this
unit.
• If a device to be connected is [Smartphone], the password is not
displayed. Select SSID to connect. (→195)
To Next Page
Loading...
