Application (Record)
Using Zoom
SQW0195
- 84 -
[Step Zoom]
You can set the zoom operation to allow easy visualization of the angle of view (picture
angle) for the focal length of a regular fixed focal length lens (as with a 35 mm film
camera). When using the Step Zoom, you can operate the zoom ratio as easily as
changing the camera lens.
• If recording in [Intelligent Auto] Mode, you can adjust the [Step Zoom] with the control
ring/control dial.
If the setting assigned to the control ring/control dial is [Step Zoom], [Step Zoom] will
also be available for use in other modes. (→135)
Turn the control ring or control dial
(In [Program AE] Mode, the control ring is assigned to [Step Zoom].)
Current zoom position
(Focal lengths the same as those of a 35 mm film camera)
The illustration is an example of when using Extended optical zoom, [i.Zoom], and
[Digital Zoom]. The zoom ratio is not displayed. (→81)
■
Using the zoom lever for [Step Zoom]
You can use the zoom lever for [Step Zoom] by setting [Zoom Lever Set] to [Step Zoom]
in the [Setup] menu. (→65)
Current zoom position
(Focal lengths the same as those of a 35 mm film camera)
To Next Page
Loading...
