EasyManuals Logo

Panasonic LUMIX DMC-ZS60 User Manual

Panasonic LUMIX DMC-ZS60
406 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #242 background imageLoading...
Page #242 background image
242
SQW0547
Stabilizer, Zoom and Flash
Taking pictures with flash
About [ ] (Forced Flash Off)
When pictures cannot be taken using the flash because the flash is closed or during
motion picture recording, etc., [ ] (Forced Flash Off) is displayed on the recording
screen and the flash will not fire.
ZS100
Close the flash in places where its use is prohibited so that it will not fire.
ZS60
Press and select [ ] in places where its use is prohibited so that it will not
fire.
How to use the flash effectively
Taking a picture using the flash with the subject too close may cause overexposure.
When you set [Highlight] in the [Custom] menu to [ON], the overexposed areas will flash
black and white during [Auto Review] or playback. If that happens, we recommend taking
the picture again, for example, after setting a lower flash output using [Flash Adjust.]
(→250).
The available flash range
Edges of a picture may become slightly dark if using flash at short distances without
using zoom (close to max. Wide). This may be remedied by using a little zoom.
Max. Wide Max. Tele
ZS100
Approx. 0.6 m - 8.0 m
(2.0 feet - 26 feet)
Approx. 0.7 m - 3.8 m
(2.3 feet - 12 feet)
ZS60
Approx. 0.6 m - 5.6 m
(2.0 feet - 18 feet)
Approx. 2.0 m - 2.9 m
(6.6 feet - 9.5 feet)
These ranges are obtained, the ISO sensitivity is set to [AUTO], and [ISO Limit Set] is
set to [OFF].
Avoid doing the following, as the heat or light could cause deformation or discoloration.
Putting the flash close to objects
Covering the flash with your hand as it is firing
ZS100
Closing the flash as it is firing
ZS100
Do not close the flash immediately after the preliminary flash is operated prior to taking pictures for
Forced ON/Red-Eye Reduction and other flash settings. If you close the flash immediately, it will
cause a malfunction.
Flash charging may take time if battery is low or if using flash repeatedly. When the flash is being
charged, the flash icon flashes red, and you cannot take a picture even when you fully press the
shutter button.

Table of Contents

Other manuals for Panasonic LUMIX DMC-ZS60

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic LUMIX DMC-ZS60 and is the answer not in the manual?

Panasonic LUMIX DMC-ZS60 Specifications

General IconGeneral
SensorMOS
Sensor Size1/2.3 inch
LensLEICA DC VARIO-ELMAR
Digital Zoom4x
Focal Length4.3 - 129mm (35mm Equivalent: 24-720mm)
Maximum Aperturef/3.3 - 6.4
Touch ScreenNo
Built-in FlashYes
Shutter Speed4 - 1/2000 sec
Continuous Shooting10 fps
Video Recording4K UHD (3840 x 2160) at 30p, Full HD (1920 x 1080) at 60p
Display3.0-inch LCD
LCD Screen Resolution1040k dots
ViewfinderElectronic Viewfinder (EVF)
Viewfinder Resolution1, 166k dots
Image Stabilization5-Axis Hybrid O.I.S.
ConnectivityWi-Fi
BatteryRechargeable Lithium-Ion Battery Pack, 3.6V, 1025mAh
Battery Life320 shots (CIPA standard)
Memory Card SlotSD/SDHC/SDXC
Weight282 g (including battery and SD card)
ISO Sensitivity80-3200 (Extended Mode: 6400)
Dimensions112 x 64 x 38 mm

Related product manuals