Panasonic LUMIX DMC-ZS60 - Taking Pictures after Automatically Setting the Aperture Value and Shutter Speed (Programme AE Mode); Exposure [Touch AE]

97
SQW0566
Recording mode
Taking pictures after automatically setting the
aperture value and shutter speed
(Programme AE Mode)
Recording mode:
Take pictures using automatic aperture values and shutter speed settings in accordance
with the brightness of a subject.
1
Set mode dial to [ ]
2
Press the shutter button halfway
• If the aperture value and shutter speed flash red, you do not have the correct
exposure.
3
TZ110/ZS110
While the numeric values are displayed
(approximately 10 seconds), rotate the
rear dial to change the values using
Programme Shift
• The operation can also be performed by rotating the
control ring. (→50)
• To cancel Programme Shift, either turn off the camera
or rotate the rear dial until the Programme Shift
indication turns off.
TZ80/ZS60
While the numeric values are displayed
(approximately 10 seconds), rotate the
control dial to change the values using
Programme Shift
• The operation can also be performed by rotating the
control ring. (→51)
• To cancel Programme Shift, either turn off the camera
or rotate the control dial until the Programme Shift
indication turns off.
250 125 60 30 15
5.64.02.8
50
p
Programme Shift indication
Aperture value
Shutter speed
• Programme Shift can easily be cancelled by setting a function button to [One Push
AE]. (→108)