112 VQT3H43 VQT3H43 113
Meanings of and required responses to major messages displayed on LCD monitor.
Message displays
[This memory card cannot be used]
Ɣ
A MultiMediaCard was inserted.
ĺ Not compatible with the camera. Use a compatible card.
[Some pictures cannot be deleted] [This picture cannot be deleted]
Ɣ
Non-DCF pictures (ĺ37) cannot be deleted.
ĺ Save needed data on a computer or other device, and then use [Format] on the camera. (ĺ23)
[No additional selections can be made]
Ɣ
The number of pictures that can be deleted at once has exceeded.
Ɣ
More than 999 pictures have been set as favorites.
Ɣ
The number of pictures allowing [Title Edit], [Text Stamp] or [Resize] (multiple settings) at once has
exceeded.
[Cannot be set on this picture]
Ɣ
[Print Set], [Title Edit], or [Text Stamp] cannot be made for non-DCF pictures (ĺ37).
[Please turn camera off and then on again] [System Error]
Ɣ
The lens is not working correctly.
ĺ Turn on power again.
(Consult the dealer or your nearest Service Center if display still remains)
[Some pictures cannot be copied] [Copy could not be completed]
Ɣ
Pictures cannot be copied in following cases.
ĺ Picture of same name already exists in built-in memory when copying from card.
ĺ File is not of DCF standard. (ĺ37)
ĺ Picture taken or edited on a different device.
[Not enough space on built-in memory] [Not enough memory on the card]
Ɣ
There is no space left on the built-in memory or the card. When you copy pictures from the built-in
memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.
[Built-In Memory Error] [Format built-in memory?]
Ɣ
Displayed when formatting built-in memory via computer, etc.
ĺ Reformat directly using camera. Data will be deleted.
[Memory Card Error] [Format this card?]
Ɣ
The card format cannot be used with this camera.
ĺ Save needed data on a computer or other device, and then use [Format] on the camera. (ĺ23)
[Insert SD card again] [Try another card]
Ɣ
Access to card has failed.
ĺ Insert card again.
Ɣ
Try with a different card.
[Memory card error. This card cannot be used in this camera. Format this card?]
Ɣ
Card is not of SD standard.
Ɣ
When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are
supported.
[Read Error]/[Write Error] [Please check the card]
Ɣ
Data read has failed.
ĺ Check whether card has been inserted correctly (ĺ12).
Ɣ
Data write has failed.
ĺ Turn off power and remove card, before re-inserting and turning on power again.
Ɣ
Card may possibly be damaged.
Ɣ
Try with a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
Ɣ
If recording stops even when using a card of the recommended speed class (ĺ14), the data writing
speed has dropped. If this happens, we recommend backing up the data on the memory card and
formatting it (ĺ23).
Ɣ
Motion picture recording may be automatically terminated with certain cards.
[A folder cannot be created]
Ɣ
Folder numbers in use have reached 999.
ĺ Save needed data on a computer or other device, and then use [Format] on the camera. (ĺ23)
Folder number is reset to 100 when performing [No.Reset] (ĺ22).
[Picture is displayed for 16:9 TV] [Picture is displayed for 4:3 TV]
Ɣ
AV cable (supplied) is connected to the camera.
ĺ To remove message immediately ĺ Press [MENU/SET].
ĺ To change aspect ratio ĺ Change [TV Aspect] (ĺ23).
Ɣ
USB connection cable (supplied) is only connected to the camera.
ĺ Message disappears when cable is also connected to another device.
[This battery cannot be used]
Ɣ
Use a genuine Panasonic battery.
Ɣ
Battery cannot be recognized as terminal is dirty.
ĺ Wipe any dirt away from the battery terminal.
To Next Page
Loading...
