the colour tint control
Once accessed the tint can be applied using either the top control wheel, or if you
prefer the left or right navigation buttons on the 4-way pad.
The image on the LCD, or EVF, shows the change being made. The value will remain
set until you turn off the camera or change to another mode.
This feature is useful for warming up scenes shot in cloudy, or overcast lighting, as the AWB is the only
white balance pre-set available to iA/iA+ users.
the brightness (exposure compensation) control
Brightness control, or as I would prefer to rename it exposure compensation, allows you to change the
brightness of an image if the automatic metering of the camera has over reacted causing light scenes to go
dark or dark scenes to be light.
To Next Page
Loading...
