Video Settings – Main Assist Functions
397
[WFM/Vector Scope]
This displays the waveform monitor or the vector scope on the recording
screen. You can change the size of the waveform display.
1
Set the recording mode to [ ] or [S&Q].
≥Set the mode dial. (ÎSelecting the Recording Mode: 75)
2
Set [WFM/Vector Scope].
≥ ¨ [ ] ¨ [ ] ¨ [WFM/Vector Scope]
[WAVE]
Displays a waveform.
[VECTOR]
Displays the vector scope.
[OFF]
To Next Page
Loading...
