Firmware Ver. 2.0 – Support for Upgrade Software Key
F-7
Support for Upgrade Software Key
Upgrade Software Key (DMW-SFU2: optional) is now supported.
Using an Upgrade Software Key to activate the camera enables usage of
extended functions.
[Activate] Has Been Added
Using an Upgrade Software Key (DMW-SFU2: optional) enables usage of
extended functions for the camera.
[] [] Select [Activate]
[Export Serial Code]
Exports the device information of the camera to the card.
[Import Activation Code]
Imports the activation code into the camera to enable extended functions.
[Activation List]
Displays extended functions which have been enabled for usage on the camera.
• After activation, even if [Reset] is selected in the [Setup] ([Setting]) menu,
re-activation is not required.
• Refer to the Installation guide supplied with the Upgrade Software Key
(DMW-SFU2: optional) for details about activation methods.
To Next Page
Loading...
