Firmware Ver. 3.0 – Image Stabilizer Function Has Been Enhanced
F-64
Image Stabilizer Function Has Been
Enhanced
Functionality of [E-Stabilization (Video)] has been changed.
Through the combined use of the in-lens, in-body, and electronic image
stabilizers, corrections are made to camera shake on 5 axes during video
recording along the vertical, horizontal, roll, pitch, and yaw axes, and to the
peripheral distortion that readily occurs when you are using a wide-angle
lens. (5-Axis Hybrid Image Stabilizer)
[Photo]: [] [] [Image Stabilizer] Select
[E-Stabilization (Video)]
[Video]: [] [] [Image Stabilizer] Select
[E-Stabilization (Video)]
[HIGH]
Large shakes and peripheral distortion are corrected electronically.
The angle of view is narrower than [STANDARD].
•
[ ] is displayed on the screen during video recording.
[STANDARD]
Shakes and peripheral distortion are corrected electronically.
The angle of view is narrower.
•
[ ] is displayed on the screen during video recording.
[OFF]
Turns the electronic image stabilizer (video) OFF.
•
There will be variation in the effectiveness of the correction depending on the video
mode used for recording and the recording conditions.
To Next Page
Loading...
