Firmware Ver. 2.0 – [Live View Composite] Has Been Added
F-19
• [Long Exposure NR] will be [ON].
• When recording with the flash, the flash fires only in the first frame.
• [Flash Synchro] is fixed to [1ST].
• When [Photo Style] is set to [V-Log] or [REAL TIME LUT], [Dual Native ISO
Setting] is fixed to [AUTO].
• Some menus are not displayed after getting the noise reduction image.
• The image for noise reduction is discarded when you do the following. Do Step
6
again.
– Modify the shutter speed/ISO sensitivity
– Switch the playback mode
• When pressing the shutter button fully to end recording, the last image may not
be merged.
• During Live View Composite recording, audio is not output to an external device
connected by HDMI.
• [Power Save Mode] does not work.
To Next Page
Loading...
