Firmware Ver. 3.0 – Compatible with Frame.io Camera to Cloud
F-49
Changing the Wi-Fi Connection Destination
Change the access point, etc., while connected to Frame.io.
[] [] [Frame.io] [Connection Setup]
Select [Wi-Fi Connection Setting]
≥ Press [DISP.] to reselect the connection destination.
Disconnecting from Frame.io
[] [] [Frame.io] [Frame.io Connection]
Select [OFF]
≥ The upload queue is not cleared even if you break the connection (Wi-Fi)
with Frame.io.
Unpairing (Frame.io)
[] [] [Frame.io] [Frame.io Connection]
[SET] Select [Delete]
≥ This deletes the information for pairing with Frame.io and breaks the
connection (Wi-Fi) with Frame.io.
≥ The upload queue is cleared.
To Next Page
Loading...
