Firmware Ver. 3.0 – Automatic Detection Function Has Been Enhanced
F-61
When [ ], [ ], [ ], [ ], or [ ]
If even part of a subject to be recorded enters the AF area, it is
automatically detected and focused.
•
If eyes are detected inside the AF area, eye detection (B) works.
It is not possible to change the eye to focus on.
•
[AF Detection Setting] is applied to all AF modes excluding [ ].
•
When a person’s eyes are detected, the eye closer to the camera will be brought
into focus.
The exposure will be adjusted to the face. (When [Metering Mode] is set to [ ])
•
Depending on [Detecting Subject], the number of subjects that can be detected
at once with [ ] of the AF mode will be different.
[HUMAN] ([Eye/Face/Body], [Eye/Face]): Maximum 15 (maximum 3 bodies
detected)
[ANIMAL] ([Body]), [CAR], [MOTORCYCLE]: Maximum 3
[ANIMAL] ([Eye/Body]): Maximum 1
•
Automatic detection may not be available due to the camera settings.
To Next Page
Loading...
