Panasonic MC-7650

1. Insert a regular screwdriver - into the fitting section at the
end of dust bag holder, widen it downward lightly by prying,
and remove the dust bag holder. (Fig.7)
2. Remove the spring from the dust bag holder.
1. Fit the spring into the dust bag holder. (Fig.8)
2. Fit one end of the dust bag into the upper body in such a
manner that the spring does not protrude upward, and
insert the other into the fitting hole from the lower part.
(Fig.9)
Fig.7
Fig.8
Fig.9
9.4. Dust Bag Holder
Removing:
Assembling:
15
MC-7650 / MC-7630 / MC-7610