What to do if my Panasonic MC-CG475 motor runs but there is no suction?
If your Panasonic Vacuum Cleaner's motor is running but there's no suction, check for blockages and remove them. Also, inspect the dust bag; if it's full, replace it with a new one. Examine the secondary filter for clogs; if it's choked up, remove and clean it or replace it.
How to fix a Panasonic MC-CG475 when the motor does not change power?
If the motor of your Panasonic Vacuum Cleaner always runs at full speed, and the resistance does not vary, replace the P.C.B. Ass'y. Also, if the components are short-circuited, replace the P.C.B. Ass'y.
What to do if my Panasonic MC-CG475 Vacuum Cleaner motor runs irregularly?
If your Panasonic Vacuum Cleaner motor runs irregularly, replace P.C.B. Ass’y.
How to troubleshoot a Panasonic MC-CG475 when the motor fails to rotate?
If the motor of your Panasonic Vacuum Cleaner fails to rotate, and there is no continuity, replace the cord reel partition unit. Also, if there is no continuity, replace P.C.B. Ass’y. In addition, if there is no continuity, replace the motor. Finally, if it has any problem or if anything unusual is found, replace the P.C.B. Ass’y.
General| Model | MC-CG475 |
|---|---|
| Category | Vacuum Cleaner |
| Type | Canister |
| Power | 1200W |
| Filtration | HEPA |
| Dust Capacity | 2.5 L |
| Amperage | 10 A |
To Next Page
