ASSEMBLY
➢ Insert wands into POWER NOZZLE
until the wand button snaps into
place.
➢ Connect POWER NOZZLE plug and
cord as shown.
➢ Do not force.
➢ Raised area of plug must face
toward hand.
➢ If hard to install, turn the plug over
and try again.
To Remove:
➢ Disconnect POWER NOZZLE plug
and cord.
➢ Press wand quick release pedal.
➢ Pull wands out of POWER NOZZLE.
➢ Slide wands together until wand
button snaps into place.
➢ Turn wand button to slotted area of
wand swivel.
Wands
To Next Page
