To Next PageTo Next PageWhat to do if the Panasonic MC-CJ919-R249 motor doesn’t rotate and the fuse has blown?
If the fuse has blown, identify and eliminate the cause, then replace the fuse. If the motor burn caused the fuse to blow, replace the motor as well.
General| Model | MC-CJ919-R249 |
|---|---|
| Category | Vacuum Cleaner |
| Type | Canister |
| Filtration | HEPA |
| Cordless | No |
| Bagged | Yes |
| Color | Red |
Explains how to start the vacuum cleaner operation and adjust power settings.
Details how to adjust the vacuum nozzle for various floor types and surfaces.
Instructions on utilizing the blower function for cleaning purposes.
Guidance on the proper use of the specialized 3D EZ nozzle.
Steps to diagnose and resolve issues when the motor does not rotate.
Procedures for checking the motor and identifying potential faults.
Instructions on how to check for and replace a blown fuse.
Steps to identify and fix problems with the PCB assembly.
Inspects the Triac component on the PCB for continuity and proper function.
Verifies the continuity and operation of the On/Off switch on the PCB.
Checks the resistance and switchability of the power control volume on the PCB.
Troubleshooting problems related to the power cord not extending or locking.
Diagnosing and fixing low suction power or motor stoppage issues.
Step-by-step guide to safely remove the dust cover assembly.
Instructions for removing the dust bag holder, noting internal spring.
Guide to disassembling body covers, switch pedal, and cord rewind button.
Steps to disassemble the switch pedal and cord rewind button.
Procedures for disassembling the upper body, handle cover, and guide lever.
Detailed steps for removing the handle cover from the upper body.
Instructions for sliding and removing the guide lever.
Instructions for removing the motor case set assembly.
Guide to safely disassemble the cord reel unit.
Steps to remove the rail base unit from the motor case set.
How to disassemble the fan motor unit.
Steps for disassembling motor support and suppressor components.
Guide to disassembling the Printed Circuit Board (PCB) assembly.
Instructions for assembling and replacing the blower cover.
Visual diagram of MC-CJ919/MC-CJ917 vacuum cleaner attachments.
List of part numbers for MC-CJ919/MC-CJ917 attachments.
Visual diagram of MC-CJ915 vacuum cleaner attachments.
List of part numbers for MC-CJ915 attachments.
Visual diagram of MC-CJ913 vacuum cleaner attachments.
List of part numbers for MC-CJ913 attachments.
Visual diagram of MC-CJ911 vacuum cleaner attachments.
List of part numbers for MC-CJ911 attachments.
