To Next PageTo Next PageWhy is the suction power low on my Panasonic MC-CJ907-W747?
If the suction power of your Panasonic Vacuum Cleaner is low, the first step is to remove any accumulated dust. If the issue persists, replace any broken Dust Bag, Filter, and/or Hose.
What to do if my Panasonic Vacuum Cleaner motor stops during vacuuming?
If the motor of your Panasonic Vacuum Cleaner stops during vacuuming, particularly if the Thermo Protector is active, begin by removing any dust. If the problem continues, replace any damaged Dust Bag, Filter, and/or Hose.
How to fix a Panasonic MC-CJ907-W747 Vacuum Cleaner cord that cannot be pulled out?
If the cord of your Panasonic Vacuum Cleaner cannot be pulled out due to an abnormal condition, separate the body, untwist the cord, and rewind it. Alternatively, replace the Cord Reel Unit and rewind the cord. You can also make spare turns according to the engraved number of turns or replace the Cord Reel Partition Unit.
Why doesn't the motor rotate in my Panasonic MC-CJ907-W747 Vacuum Cleaner?
If the motor in your Panasonic Vacuum Cleaner doesn’t rotate, replace the Cord Reel Assy, Body Partition Assy, or Cord Reel Partition Unit if there is no continuity. If there is a problem, replace the Motor Set and check/replace the ON/OFF Switch (with the Fuse Unit). Also, consider replacing the Power Control Unit or the Power Control Switch. If the fuse is blowing due to overcurrent, motor burn, or short-circuiting, replace the ON/OFF Switch (with the Fuse Unit/Thermo Protector). If a motor burn caused the fuse to blow, replace the motor as well.
General| Brand | Panasonic |
|---|---|
| Model | MC-CJ907-W747 |
| Category | Vacuum Cleaner |
| Language | English |
Step-by-step guide to removing the dust cover assembly.
Procedure for detaching the dust bag holder from the lower body.
Instructions for removing the main body cover and associated controls.
Steps to detach the upper body unit and power control switch.
Guide to removing the ON/OFF switch, fuse, and capacitor.
Procedure for removing the motor assembly and its casing.
Detailed steps for detaching the motor set from its components.
Instructions for removing the thermal protection component.
Steps for detaching the cord reel partition unit.
Procedure for removing the cord reel unit.
Visual breakdown of vacuum cleaner attachments.
Detailed list of attachment parts with service numbers.
Visual breakdown of the vacuum cleaner's main body components.
Detailed list of body unit parts with service numbers.
