EasyManua.ls Logo

Panasonic MC-E881 - User Manual

Panasonic MC-E881
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SPECIFICATIONS
MC-E881 MC-E883 MC-E885
Power source AC230V AC230V AC230V
AC230-240V AC230-240V AC230-240V
Depending on version
50Hz 50Hz 50Hz
Input power 450-1500W 450-1600W 450-1600W
Water lift 30 kPa 31 kPa 31 kPa
Cord length 5.5 m 5.5 m 5.5 m
Radio of operation 8.2 m 8.2 m 8.2 m
Net weight 7.0 kg 7.2 kg 7.3 kg
Dimensions (LxWxH) mm 460x313x243 460x313x243 460x313x243
Attachments:
Floor nozzle
••
Metallic tube Extension tube Telescopic tube Telescopic tube
Dusting brush
••
Crevice nozzle
••
Upholstery nozzle
••
Specifications are subject to change without notice for further improvement.
MODELS MC-E881, MC-E883, MC-E885
Ref.: Z32P6000
Matsushita Electric España, S.A.
DIVISION DE ASPIRADORAS
Zona Industrial del Polígono de CELRÀ
17460 CELRÀ (Girona) SPAIN
Vacuum Cleaner

Questions and Answers

  • V
    Valerie CampbellAug 11, 2025
    What to do if Panasonic Vacuum Cleaner floor nozzle dust sensor is not working? (MC-E885 only).
    • S
      scottcodyAug 11, 2025
      If the floor nozzle dust sensor on your Panasonic Vacuum Cleaner (MC-E885 model only) isn't working, it could be due to a blockage that needs to be removed. Alternatively, if the sensor is very dusty, clean it using a soft dry duster.
  • R
    Robin RodriguezAug 15, 2025
    Why Panasonic MC-E881 motor runs but does not suction?
    • A
      awalkerAug 15, 2025
      Your Panasonic Vacuum Cleaner might not be suctioning due to several reasons: - There could be a blockage that needs to be removed. - The paper bag might be full and requires replacement. - The central filter could be dirty and needs cleaning or replacement.
  • E
    Edgar YoungAug 20, 2025
    What to do if my Panasonic MC-E881 motor fails to rotate and no noise is heard?
    • D
      Daniel FigueroaAug 20, 2025
      If your Panasonic Vacuum Cleaner's motor isn't rotating and there's no noise, consider these potential solutions: - If there is no continuity in the power cord, replace the power cord. - If there is a gap between the carbon brush and commutator, replace both carbon brushes. - If the contact is not correct, replace the motor. - If the power control circuit is in an open circuit, replace the power control circuit. - If the lead wires connection is not correct, repair them.
  • J
    Justin TaylorAug 26, 2025
    Why Panasonic MC-E881 Vacuum Cleaner has noise or vibration?
    • L
      Lori HaynesAug 26, 2025
      If your Panasonic Vacuum Cleaner is producing unusual noise or vibration, it might be due to dust accumulated in the motor fan. Replace the motor and check the filter condition. Never try to dismantle the motor fan.
  • T
    Taylor ThompsonAug 30, 2025
    What to do if Panasonic MC-E881 Vacuum Cleaner motor does not change power and runs always at full speed?
    • M
      Melissa AllenAug 30, 2025
      If the motor of your Panasonic Vacuum Cleaner always runs at full speed and doesn't change power, it could be due to a short-circuited component. If the power control circuit is short-circuited, replace it.
  • J
    Jason WatsonSep 4, 2025
    How to fix a Panasonic Vacuum Cleaner motor that runs irregularly?
    • J
      James MaciasSep 4, 2025
      If your Panasonic Vacuum Cleaner motor runs irregularly, the issue might be due to bad contact. In this case, replace the sliding potentiometer.

Panasonic MC-E881 Specifications

General IconGeneral
BrandPanasonic
ModelMC-E881
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals