Motor Protector
➢ The motor protector automatically
opens to provide cooling air to the
motor when a clog occurs or when
dust bag needs changing.
➢ Motor protector may open when
using tools.
➢ If motor protector opens, the vacuum
cleaner will make a slightly different
sound.
Note: Do not block motor protector.
➢ If a clog prevents the normal flow of air to the motor, the thermal protector turns the
motor off automatically to allow the motor to cool in order to prevent possible
damage to the vacuum cleaner.
➢ To correct problem, turn off and unplug vacuum cleaner, remove clogs, and/or
clean/replace filters.
➢ Replace full bag if necessary.
➢ Wait approximately thirty (30) minutes, plug vacuum cleaner in, turn on to see if
thermal protector has reset. Thermal protector will not reset if vacuum cleaner is not
turned off even if vacuum cleaner cools down.
Thermal Protector
To Next Page
Loading...
