- 32 -
➢ When the bristles on the agitator are
worn so that they do not touch a card
held across the lower plate, the
agitator should be replaced.
➢ Remove lower plate and agitator.
➢ Position belt over belt pulley on the
new agitator.
➢ Reinstall agitator and lower plate.
Agitator Assembly
Replacing Agitator
Cleaning Exterior
➢ Unplug cord from wall outlet.
➢ Clean exterior using a clean, soft cloth that has been dipped in a solution of mild
liquid detergent and water and wrung dry.
➢ DO NOT drip water on vacuum cleaner, wipe dry after cleaning.
➢ DO NOT clean tools in dishwasher or clothes washer.
➢ Wash tools in warm, soapy water, rinse and air dry.
➢ DO NOT use tools if they are wet.
To Next Page
Loading...
