➢ Remove lower plate.
➢ Remove bulb socket screw, grasp the
bulb socket assembly and pull
upward while moving it back and
forth.
➢ Remove old bulb from the bulb
socket assembly by pushing in while
turning counter-clockwise.
➢ Replace bulb by pushing in while
turning clockwise.
➢ Only use a bulb rated 130 V AC-15
Watts or less.
➢ Reinstall bulb socket assembly into
nozzle housing by pushing it back
down into slot and reinstall bulb
socket screw.
➢ Reinstall lower plate.
To Next Page
Loading...
