➢ Press dust bin lid release and the
dust bin will open and the debris
will fall out.
➢ Remove any clogs that might be
located in the pre-filter. (See
CLEANING PRE-FILTER, p. 36, 38)
➢ Shake the dust bin to release any
debris that might hang in the pre-
filter
TO REPLACE DUST BIN
➢ After the dust bin is empty of
debris, firmly close the door. Make
sure you hear a “click” sound to
indicate that the door is fully
latched.
- 34 -
➢ Place dust bin back into vacuum
cleaner by inserting the bottom first
and tilting back.
➢ Push forward and lower dust bin
handle to lock dust bin in place.
To Next Page