Panasonic MC-UL425

- 48 -
Cleaning Agitator
➢ Clean agitator after every five uses
and every time the belt is replaced.
➢ Remove lower plate. (See
REPLACING BELT, p. 44)
➢ Cut off any hair, thread, string,
carpet pile, and lint entangled
around agitator with a pair of
scissors.
➢ Remove agitator. (See REPLACING
BELT, p. 44)
➢ Remove any string or debris located
on the end caps, washers or agitator
shaft.
➢ Reinstall agitator and lower plate.
(See REPLACING BELT, p. 46)