If the vacuum cleaner does not seem to
have adequate suction, first check if
the dust bin is full or if a filter is
clogged.
➢ Turn off and unplug the vacuum
cleaner.
➢ Remove dust bin and check for
clogs.
➢ Check the hose inlet area.
➢ Visually inspect the tools, the hose,
and the hose holder area into which
the hose is connected.
➢ Check the suction inlet area.
➢ Remove any visible clog.
➢ Plug in the vacuum cleaner and turn
it on.
➢ Stretch the hose to maximum length
and then allow the hose to return to
its storage length.
➢ If the dust bin and filter areas and
the hose areas are free of clogs,
check the nozzle area.
- 50 -
To Next Page
Loading...
