- 36 - - 13 -
Power Tools on Board Cord Length
120V AC(60Hz)
Yes 50 Ft. (15.25 m)
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
Voltaje
Herramientas
Extensión
incluídas de cordón
120V AC(60Hz)
4 posición 15,25 m (50 pi)
Alimentation Accessoires Cordon
d’alimentation
120 V c.a. (60 Hz)
Oui 15,25 m (50 pi)
Removing Clogs
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢➢
Unplug vacuum.
➢➢
Pull open suction inlet cover and
check for clogging.
➢➢
Disconnect wand from short hose
and check wand and hose.
➢➢
Plug in vacuum cleaner and turn on.
➢➢
Disconnect wand and stretch hose in
and out to remove clog.
➢➢
If clog still exists, turn vacuum
cleaner OFF and UNPLUG PO
WER
CORD.
➢➢
Remove lower plate.
➢➢
Remove short hose from nozzle by
lifting straight up.
➢➢
Inspect hose end and clear any
obstructions.
➢➢
Reinstall short hose and lower plate.