SMALL INNER DOOR (OPTION)
There is an small inner door (MDF-7ID1 or MDF-5ID1) of the shelf width of the chamber in this product by
the option. The user divided into every shelf of the chamber is to change a standard small inner door to
MDF-7ID1 (for MDF-U76V and MDF-U76VC) or MDF-5ID1 (for MDF-U56V and MDF-U56VC). Refer to
an attached installation manual for the installation of MDF-7ID1/MDF-5ID1 in the small inner door.
Note:
Be careful because this manual (Page 40”PERFORMANCE”) can cool down a cooling performance more
than mention when the put an small inner door (MDF-7ID1 or MDF-5ID1).
Cooling performance : -82
o
C at the center of the chamber (ambient temperature; 30
o
C, no load)
Set it up by more than +5
℃
to the lowest set temperature when the use in a long time.
AN optional inventory rack IR-224U cannot be used when an small inner door is installed.
DRAWER RACK(OPTION)
There is a drawer rack (MDF-50R) for the chamber bottom side in MDF-U56V/MDF-U56VC by the option.
Install MDF-50R under the chamber when it use a drawer rack in the chamber. Refer to the manual of
MDF-50R for the installation.
INTERFACE BOARD (OPTION)
Installation of MTR-480/MTR-L03
Contact our sales representative or agent for the attachment of a interface board. :
Note:
＊
When a data transmitting function to the personal computer is done, an interface board MTR-480
(option goods) and communication cable of 9 pin Dsub cross type for RS232C are necessary.
＊
The connecting cable between the PC and MTR-L03 terminal is not enclosed. Provide a cross type
cable of less than 100 m length having a pin plug.
To Next Page
Loading...
