EN8
mill
appliance
/
/
mill container and motor housing, then twist
it firmly until you hear a "click" sound.
Assemble it tightly. (P. EN6)
Refer to “Overload and Overheating Protection” for inspection. (P. EN7)
Insert the power plug into outlet firmly.
Refer to “Overload and Overheating Protection” for inspection. (P. EN7)
Reduce ingredient amount.
Assemble it tightly. (P. EN6)
Assemble it tightly. (P. EN6)
Attach it properly.
Remove them.
Contact Panasonic Service Center to replace it.
Add more liquid.
①
②
220
-
240 V 50
-
60 Hz
230
-
260
W
(Repeat the cycle
of 3 minutes ON and then 1 minute OFF)
(
Repeat the cycle
of 1 minute ON and then 2 minutes OFF
)
1000
mL
50
g
173
mm
148
mm
D
161
mm
161
mm
H
353
mm
257
mm
1.5
kg
1.3
kg
To Next Page
Loading...
